Here's how to use beard oil effectively: apply 3 to 5 drops to a slightly damp beard, work it in with your fingertips right down to the skin, then comb through to tame the hairs. This daily ritual nourishes your beard, soothes the skin underneath and leaves a subtle scent all day long. The Beard Oil - 7 Oils - Oud Scent combines seven precious plant oils for optimal results.
Whether you have stubble or a long beard, beard oil turns coarse hairs into a soft, shiny beard. You just need to know how to apply it properly.
Why use beard oil?
Your beard and facial skin have specific needs. Beard hairs are naturally thicker and drier than the hair on your head. Without the right care, they become rough, hard to style and cause itching.
A quality beard oil helps to deeply moisturise the hairs while nourishing the skin underneath. It prevents irritation, reduces beard dandruff and makes daily styling easier.
The oil also forms a protective barrier against external aggressors: pollution, wind and cold. The result: a beard that feels softer, looks well-groomed and smells pleasant.
- 7 oilsplant-based, in our formula
- 3-5 dropsare enough per application
- 1x a dayfor a well-nourished beard
- 100% naturalno silicones or parabens
How much beard oil should you use?
The amount depends on the length and thickness of your beard. Too much oil will leave it looking greasy; too little won't nourish it enough.
Short beard (less than 2 cm)
Use 2 to 3 drops. This length needs very little product because the hairs are close to the skin, which still produces natural sebum.
Medium beard (2 to 6 cm)
Allow 4 to 5 drops. This is the length at which a beard really starts to dry out and needs daily nourishment.
Long beard (more than 6 cm)
Use 6 to 8 drops, or even more depending on density. The ends dry out more and need special attention.
Dosage tip
Always start with a small amount. You can always add an extra drop if needed, but you can't remove the excess once it's applied.
How to apply beard oil step by step
Your application technique makes all the difference between a greasy beard and a perfectly nourished one.
Step 1: Prep your beard
Apply the oil to a clean, slightly damp beard, ideally after a shower. The moisture helps spread the product and lets it absorb. Pat your beard dry with a towel rather than rubbing.
Step 2: Pour the oil into your palms
Put the right number of drops into the palm of one hand. Rub your palms together to warm the oil and make it easier to apply.
Step 3: Apply from the skin to the ends
Slide your hands under your beard and massage the skin of your face first with your fingertips. This is essential: the skin under your beard needs nourishing and soothing to prevent itching.
Then work up towards your cheeks and neck, and spread the oil along the full length of the hairs right to the ends. Massage in circular motions so it absorbs well.
Step 4: Comb or brush
Use a wide-tooth comb or a natural-bristle brush to distribute the oil evenly and tame your beard. Brushing also stimulates blood circulation and helps remove dead skin.
Step 5: Shape your style
Shape your beard the way you want while it's still slightly damp and oiled. This is the perfect moment to tame unruly hairs.
A well-oiled beard is a beard that radiates health and self-care.
When should you apply beard oil?
How often you apply it has a direct impact on the health of your beard.
Daily application
For most men, one application a day is enough. The best time: in the morning after a shower, when your pores are open and your beard is clean.
Twice a day for very dry beards
If your beard is particularly coarse or you live in a dry climate, apply the oil morning and evening. Use slightly less each time to avoid a greasy look.
Seasonal adjustments
In winter, apply it more often: cold weather and central heating dry your beard out even more. In summer, you can apply it slightly less often if your skin produces more sebum.
Good to know
Beard oil can be used on a damp or dry beard, but applying it to a slightly damp beard helps the product absorb and spread more evenly.
What's the difference between beard oil and beard balm?
These two complementary products meet different needs.
| Criterion | Beard oil | Beard balm |
|---|---|---|
| Texture | Liquid, absorbs quickly | Solid/cream, stays on the surface |
| Main function | Deeply nourishes skin and hair | Styles and holds the shape |
| Finish | Light natural shine | Matte look, strong hold |
| Ideal for | Daily moisture, all lengths | Medium to long beards, styling |
| Application | On a damp or dry beard | On a dry beard only |
You can combine the two: oil in the morning to nourish, balm during the day to rework the shape if needed.
Why choose the 7-Oil Beard Oil with Oud scent?
Our formula brings together seven precious plant oils selected for their complementary properties. Each oil brings its own specific benefits to nourish, soften and protect your beard.
The Oud scent is woody, warm and deep, typical of refined oriental fragrances. This masculine, enveloping scent accompanies you elegantly throughout the day without being overpowering.
If you prefer other fragrance families, discover the Beard Oil - 7 Oils - Bois d'Argent Scent with fresh, woody notes, or the Beard Oil - 7 Oils - Kalimat Scent for a spicier fragrance.
All our oils are 100% natural, free from silicones, parabens and artificial colourings. They are gentle on sensitive facial skin and suit all beard types.
Beard oil mistakes to avoid
Even the best product won't deliver results if you make these common mistakes.
Applying it to a dirty beard
Oil traps dirt and impurities. Always wash your beard before applying the oil, ideally with a gentle beard-specific shampoo.
Using too much product
Too much oil gives an unattractive greasy look and can clog pores. Stick to the recommended amount for your beard length.
Forgetting the skin underneath
Many men only apply oil to the visible hairs. But the skin under the beard needs nourishing too, to prevent itching and dandruff.
Not massaging enough
A quick application doesn't give the oil time to absorb. Take the time to massage it in to stimulate circulation and help the active ingredients absorb.
Applying it to a soaking-wet beard
A beard that's too wet dilutes the oil and makes it less effective. Pat it dry with a towel first so it's just damp.
Key point
Consistency is what makes the difference. Daily application for at least two weeks is needed to see a real transformation in your beard.
How should you store your beard oil?
Storing it properly preserves your oil's properties and extends its shelf life.
Keep the bottle in a cool, dry place away from direct sunlight. Heat and light degrade plant oils and make them less effective.
Always close the bottle tightly after use to prevent oxidation. A well-sealed bottle keeps its qualities for several months.
Avoid leaving the bottle in the bathroom if it's very humid. Excess moisture can alter the oil's texture.
How long does a bottle of beard oil last?
It depends on how often you use it and how long your beard is.
For a medium beard with a daily application of 4 drops, a 30 ml bottle lasts about 2 to 3 months. A short beard will use less, a long beard more.
It's a worthwhile investment: just a few drops a day are enough to completely transform the look and comfort of your beard.
Is beard oil suitable for all skin types?
Yes, a natural, well-formulated beard oil suits all skin types, even sensitive skin.
Oily skin also benefits from beard oil: contrary to popular belief, applying a plant oil helps regulate sebum production. The skin stops overproducing oil when it is properly nourished.
For dry or irritation-prone skin, the oil soothes itching and helps reduce redness. It forms a protective film that preserves the skin's natural moisture.
If your skin is very reactive, test the oil on a small area for 24 hours before applying it all over.
Caring for your beard also means caring for the skin beneath it.
FAQ: common questions about how to use beard oil
Can you use beard oil every day?
Yes, daily use is actually recommended to keep your beard soft and well nourished. One application a day is enough for most men.
Does beard oil make your beard grow faster?
No, beard oil doesn't change how fast your beard grows, which depends on genetic and hormonal factors. However, it helps keep the hairs healthy, reduces breakage and makes your existing beard look its best.
Do you need to rinse beard oil off after applying it?
No, beard oil is a leave-in treatment. It should stay on your beard to nourish it continuously. If you've applied too much, gently blot off the excess with a towel.
What's the difference between beard oil and pure argan oil?
Pure argan oil is an excellent ingredient, but a formulated beard oil combines several plant oils with complementary properties, plus a pleasant scent. This synergy delivers better results than a single oil.
Does beard oil stain clothes?
If you stick to the recommended amounts and allow a few minutes for it to absorb before getting dressed, the oil won't stain. Just avoid rubbing your beard directly against light-coloured fabric right after applying it.
